Professional pagesISAE-SUPAERO professors

Eric Paroissien

PUBLICATION ACTIVITIES

Updated :

Some issues of listed references below can be found on OATAO (Open Archive Toulouse Archive Ouverte)

 THESIS [TH]

Paroissien, E., 2020. Modélisation simplifiée des transferts d’efforts dans les assemblages boulonnés et/ou collés. Mémoire d’Habilitation à Diriger des Recherches, Université de Toulouse III Paul Sabatier (FR).
oatao link

Paroissien, E., 2006. Contribution aux Assemblages Hybrides (Boulonnés/Collés) – Application aux Jonctions Aéronautiques. PhD Thesis, Université de Toulouse III Paul Sabatier (FR)
oatao link

Paroissien, E., 2003. Reprise Hydrique des Matériaux Composites Carbone Epoxy (IM7/977-2). Master Thesis, EADS CRC and ENSICA, September 2003.

 BOOK SECTION [OSC]

Paroissien, E., Lachaud, F., Jacobs, T., 2013. A Simplified Stress Analysis of Bonded Joints using Macro-Elements. In S. Kumar, & K.L. Mittal (Eds.), Advances in modeling and design of adhesively bonded systems (chapter 4, pp. 93-146). Beverly (MA): Wiley-Scrivener.
doi: 10.1002/9781118753682.ch4
oatao link

Paroissien, E., Sartor, M., Huet, J., 2007. Hybrid (Bolted/Bonded) Joints Applied to Aeronautic Parts: Analytical One-Dimensional Models of a Single-Lap Joint. In S. Tichkiewitch, M. Tollenaere, & P. Ray (Eds.), Advanced in integrated design and manufacturing in mechanical engineering II (pp. 95-110). Dordrecht, The Netherlands: Springer.
doi: 10.1007/978-1-4020-6761-7_7
oatao link

 ARTICLE [ACL]

Birro, T., Aufray, M., Paroissien, E., Lachaud, F., 2021. Assessment of interface failure behaviour for brittle adhesive using the three-point bending test. International Journal of Adhesion and Adhesives, 102, 102891
doi: 10.1016/j.ijadhadh.2021.102891

Torrelli, V., Paroissien, E., 2020. Simplified stress analysis of multilayered bonded structure under 1D-bar kinematics. Composite Structures, 112, 112641.
doi: 10.1016/j.compstruct.2020.112641
oatao link

Birro, T., Paroissien, E., Aufray, M., Lachaud, F., 2020. A methodology based on the coupled criterion for the assessment of adhesive-to-adherend interface crack initiation. International Journal of Adhesion and Adhesives, 102664.
doi: 10.1016/j.ijadhadh.2020.102664
oatao link

Montagne, B., Lachaud, F., Paroissien, E., Martini, D., Congourdeau, F., 2020. Failure analysis of single lap composite laminate bolted joints: comparison of experimental and numerical tests. Composite Structures, 238, 111949.
doi: 10.1016/j.compstruct.2020.111897
oatao link

Lachaud, F., Paroissien, E., Michel, L., 2020. Validation of a simplified analysis for the simulation of delamination of CFRP composite laminated materials under pure mode I. Composite Structures, 237, 111897.
doi: 10.1016/j.compstruct.2020.111897
oatao link

Jaillon, A., Jumel, J., Lachaud, F., Paroissien, E., 2020. Mode I cohesive zone model parameters identification and comparison of measurement techniques based on uncertainty estimation. International Journal of Solids and Structures, 191-192, 577-587.
doi: 10.1016/j.ijsolstr.2019.12.014
oatao link

Ordonneau, B., Paroissien, E., Salaün, M., Malrieu, J., Guigue, A., Schwartz, S., 2020. A methodology for the computation of the macro-element stiffness matrix for the stress analysis of a lap joint with functionally graded adhesive properties. International Journal of Adhesion and Adhesives, 97, 102505.
doi: 10.1016/j.ijadhadh.2019.102505
oatao link
Supplementary Materials:

Zip - 25.6 kb

Sekmen, K., Paroissien, E., Lachaud, F., 2020. Simplified stress analysis of multilayered adhesively bonded structures. International Journal of Adhesion and Adhesives, 97, 102497.
doi: 10.1016/j.ijadhadh.2019.102497
oatao link
Supplementary Materials:

Zip - 13.7 kb

Jaillon, A., Jumel, J., Paroissien, E., Lachaud, F., 2020. Mode I cohesive zone model parameters identification and comparison of measurement techniques for robustness to the law shape evaluation., The Journal of Adhesion, 96:1-4, 272-299.
doi: 10.1080/00218464.2019.1669450
oatao link

Paroissien, E., Lachaud, F., 2019. On the potential static strength of hybrid (bolted/bonded) lap joints with functionally graded adhesives. AIAA Journal, 57 (9), 4093-4103
doi: 10.2514/1.J058372
oatao link
Supplementary Materials:

Zip - 2.6 kb

Schwartz, S., Paroissien, E., Lachaud, F., 2019. General formulation of macro-elements for the simulation of multi-layered bonded structures. The Journal of Adhesion, 96, 602-632.
doi: 10.1080/00218464.2019.1622420
oatao link

Paroissien, E., Lachaud, F., da Silva, L.F.M., Seddiki, S., 2019. A comparison between macro-element and finite element solutions for the stress analysis of functionally graded single-lap joints. Composite Structures, 215, 331-350.
doi: 10.1016/j.compstruct.2019.02.070
oatao link

Lélias, G., Paroissien, E., Lachaud, F., Morlier, J., 2019. Experimental Characterization of Cohesive Zone Models for Thin Adhesive Layers Loaded in Mode I, Mode II, and Mixed-Mode I/II by the use of a Direct Method. International Journal of Solids and Structures, 158, 90-115.
doi: 10.1016/j.ijsolstr.2018.09.005
oatao link

Paroissien, E., da Silva, L.F.M., Lachaud, F., 2018. Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads. Composite Structures, 203, 85-100.
doi: 10.1016/j.compstruct.2018.07.015
oatao link
Supplementary Materials on : https://data.mendeley.com/datasets/...

Zip - 11.8 kb

Paroissien, E., Lachaud, F., Morlier, J., Schwartz, S., 2018. A direct method for the assessment of cohesive zone models for thin adhesive layers loaded in mode I, mode II, and mixed-mode I/II. Reviews of Adhesion and Adhesives.
doi: 10.7569/RAA.2018.097301
oatao link
https://www.ingentaconnect.com/cont...

Paroissien, E., Lachaud, F., Schwartz, S., Da Veiga, A., Barrière, P., 2017. Simplified stress analysis of hybrid (bolted/bonded) joints. International Journal of Adhesion and Adhesives, 77, 183-197.
doi: 10.1016/j.ijadhadh.2017.05.003
oatao link

Lélias, G., Paroissien, E., Lachaud, F., Morlier, J., Schwartz, S., Gavoille, C., 2015. An extended semi-analytical formulation for fast and reliable stress analysis of adhesively bonded joints. International Journal of Solids and Structures, 62, 18-39.
doi: 10.1016/j.ijsolstr.2014.12.027
oatao link

Paroissien, E., Gaubert, F., Da Veiga, A., Lachaud, F., 2013. Elasto-plastic analysis of bonded joints with macro-elements. Journal of Adhesion Science and Technology, 27 (13), 1464-1498.
doi: 10.1080/01694243.2012.745053
oatao link

Hoang-Ngoc, C.T., Paroissien, E., 2010. Simulation of single-lap bonded and hybrid (bolted/bonded) joints with flexible adhesive. International Journal of Adhesion and Adhesives, 30 (3), 117-129.
doi: 10.1016/j.ijadhadh.2009.12.002
oatao link

Paroissien, E., Sartor, M., Huet, J., Lachaud, F., 2007. Analytical two-dimensional model of a hybrid (bolted/bonded) single-lap joint. Journal of Aircraft, AIAA, ISSN 0021-8669, 44 (2), 573-582.
doi: 10.2514/1.24452
oatao link

 CONFERENCE PAPER [ACT]

Pichon, G., Daidié, A., Paroissien, E., Benaben, A., 2021. Influence des jeux et des désalignements sur un assemblage simple cisaillement. Assemblage Hole to Hole d’une structure aéronautique. Proceedings of 17ème Colloque S-mart, 31 March – 2 April 2021.

Montagne, B., Lachaud, F., Paroissien, E., Martini, D., Congourdeau, F., 2019. Nonlinear finite element analysis of composite bolted lap-joints : experimental vs. numerical tests. Proceedings of 22nd Conference on Composite Materials (ICCM 22), 11-16 August 2019, Melbourne (AU).
oatao link

Jaillon, A., Jumel, J., Lachaud, F., Paroissien, E., 2019. Cohesive zone model identification on mode I bonded assembly: sensitivity analysis. Proceedings of 22nd Conference on Composite Materials (ICCM 22), 11-16 August 2019, Melbourne (AU).
oatao link

Montagne, B., Lachaud, F., Paroissien, E., Martini, D., Congourdeau, F., Dragon-Louiset, M., 2019. Analyse non linéaire par éléments finis d’assemblages composites boulonnés : comparaison essais-calculs. Proceedings of 21st Journées Nationales Composites (JNC 21), 1-3 July 2019, Bordeaux (FR).
oatao link

Jaillon, A., Jumel, J., Lachaud, F., Paroissien, E., 2019. Identification des modèles de zones cohésives en mode I pour des assemblages composites collés : état de l’art et analyse de sensibilité. Proceedings of 21st Journées Nationales Composites (JNC 21), 1-3 July 2019, Bordeaux (FR).
oatao link

Montagne, B., Lachaud, F., Paroissien, E., Martini, D., 2018. Analyzing the failure of composite bolted joints: Experimental results and 2D analysis. Proceedings of 18th European Conference on Composite Materials (ECCM 2018), 25-28 June 2018, Athens (GR).
oatao link

Jaillon, A., Jumel, J., Lachaud, F., Paroissien, E., Renart, J., 2018. Thickness influence on a structural methacrylate adhesive behavior. Proceedings of 6th World Congress on Adhesion and Related Phenomena (WCARP 2018), 25 February – 2 March 2018, San Diego (CA).
oatao link

Paroissien, E., Da Veiga, A., Laborde, A., 2011. An 1D-beam approach for stress analysis and fatigue life prediction of bonded joints. 26th International Committee on Aeronautical Fatigue (ICAF 2011), 1–3 June 2011, Montréal, CN, Book of Proceedings, Springer Eds., ISBN 978-94-007-1663-6, pp. 359-374.
doi: 10.1007/978-94-007-1664-3_29
oatao link

Paroissien, E., Hoang-Ngoc, C.T., Bhugaloo, H., Ducher, D., 2009. Improving the fatigue life of single-lap bolted joints thanks to the hybrid (bolted/bonded) joining technology. 25th International Committee on Aeronautical Fatigue (ICAF 2009), 27-29 May 2009, Rotterdam, NL, Book of Proceedings, Springer Eds., ISBN 978-90-481-2745-0, pp. 475-492.
doi: 10.1007/978-90-481-2746-7_27
oatao link

Paroissien, E., Sartor, M., Huet, J., 2006. Hybrid (bolted/bonded) joints applied to aeronautic parts: Analytical one-dimensional models of a single-lap joint. 6th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (6th IDMME), AFM, 17-19 May 2006, Grenoble (FR), proceeding on CD-ROM, ISBN 2-9523979-1-0, paper No. 34.
oatao link

Paroissien, E., Sartor, M., Huet, J., Lachaud, F., 2006. Hybrid (bolted/bonded) joints applied to aeronautic parts: Analytical two-dimensional model of a hybrid (bolted/bonded) single-lap joint. 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference (47th SDM AIAA), 1-4 May 2006, Newport (RI), paper AIAA-2006-2268.
doi: 10.2514/6.2006-2268
oatao link

Paroissien, E., Sartor, M., Huet, J., 2005. Contribution aux assemblages hybrides (boulonnés/collés) aéronautiques : modèle analytique monodimensionnel. 17ème Congrès Français de Mécanique (17ème CFM), AFM, Proceeding on CD-ROM, Paper No. 162, 30 August - 3 September 2005, Troyes (FR).
oatao link

Didierjean, S., Michel, L., Barrau, J.J., Paroissien, E., 2003. Predicting the behavior of graphite/epoxy laminates under hydrothermal loads. EUROMECH 453, December 2003, Saint-Etienne (FR).
oatao link

 INVITED CONFERENCE [INV]

Paroissien, E., Gourinat, Y., 2018. Stratégie de modélisation avancée des assemblages structuraux aérospatiaux. Matériaux, interfaces, fatigue, dynamique. Journée scientifique 3AF & Onera Assemblages innovants : de l’élaboration matérielle à la modélisation structurale, Invited keynote lecture, 13 June 2018, Châtillon (FR).
oatao link

 CONFERENCE (without paper) [COM]

Silva, L.A., Espinosa, C., da Silva, L.F.M., Paroissien, E., Lachaud, F., 2019. Simulation of adhesive squeeze flow using smoothed particle hydrodynamics. Computational Methods in Multi-Scale, Multi-Uncertainty and Multi-Physisc Problems (CM4P - Eccomas Thematic Conference), 15-17 July 2019, Porto (PT).

Silva, L.A., Espinosa, C., da Silva, L.F.M., Paroissien, E., Lachaud, F., 2019. Numerical simulations of adhesive squeeze flow: a review. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).

Sekmen, K., Paroissien, E., Lachaud, F., 2019. Simplified Stress Analysis of Multilayered Adhesively Bonded Metallic Structures. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).

Ordonneau, B., Paroissien, E., Salaün, M., Malrieu, J., Guigue, A., Schwartz, S., 2019. A methodology for the approached formulation of a macro-element for the simulation of bonded overlap with graded properties. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).

Jaillon A., Jumel, J., Paroissien, E., Lachaud, F., 2019. Cohesive zone model identification in mode I: parameters sensitivity. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).

Birro T.V., Paroissien, E., Aufray, M., Lachaud, F., 2019. Adhesive failure characterization using Coupled Criterion and Cohesive Zone Modeling. 5th International Conference on Structural Adhesive Bonding Conference (AB2019), 11-12 July 2019, Porto (PT).

Birro, T.V., Paroissien, E., Aufray, M., Lachaud, F., 2018. Prediction of adhesion failure of bonded joints using 3-point bending test and stress-energy coupled criterion. Proceedings of 8th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2018), 28-31 August September 2018, Tarbes (FR).
oatao link

Paroissien, E., Da Veiga, A., Schwartz, S., Lélias, G., Lachaud, F., 2015. Modélisation simplifiée de liaisons collées à l’aide de la technique par macro-élément. Revue des développements réalisés depuis 2004. Forum TERACTEC, 24 June 2015, Ecole Polytechnique, Palaiseau (FR).
http://www.teratec.eu/library/pdf/f...
oatao link

Lachaud, F., Piquet, R., Paroissien, E., Huet, J., 2013. Approche couplée essais-calculs pour l’analyse du comportement des assemblages boulonnés en composites stratifiés. NAFEMS, 30 May 2013, Noisy-le-Grand (FR).
oatao link

 CONFERENCE POSTER [AFF]

Jaillon, A., Lachaud, F., Paroissien, E., Jumel, J., 2019. Modélisations numériques de joints de colle épais en mode I. JADH2019, 2-6 December 2019, Annecy (FR).

Ordonneau, B., Paroissien, E., Salaün, M., Malrieu, J., Guigue, A., Schwartz, S., 2019. Analyse simplifiée du comportement mécanique des joints collés à gradient de propriétés. JADH2019, 2-6 December 2019, Annecy (FR).

Birro, T.V., Paroissien, E., Aufray, M., Lachuad, F., 2018. Prediction of adhesion failure of bonded joints using 3-point bending test and stress-energy coupled criterion. Proceedings of 12th European Adhesion Conference (EURADH 2018), 5-7 September 2018, Lisbon (PT).
oatao link

Aufray, M., Paroissien, E., Sauvage, J.B., Poquillon, D., Lachaud, F., 2017. Modélisation numérique et expérimentale de l’essai de flexion trois points. JADH2017, 11-13 October 2017, Sainte-Maxime (FR).
oatao link

 OTHER PUBLICATION [AP]

Silva, L.A., Espinosa, C., da Silva, L.F.M., Paroissien, E., Lachaud, F., Sanches, L., 2019. Simulating the squeeze flow of a technical adhesive to contribute to a demise design. CNES COMET Animation “Design for Demise”, 3 October 2019, CNES, Toulouse (FR)

Paroissien, E., Campassens, D., 2011. Stress analysis support to structural sealant development. 14th Numerical Simulation Meeting, HUTCHINSON, 16 June 2011, Abbaye des Vaux de Cernay (FR).

Hoang-Ngoc, C.T., Paroissien, E., 2009. Modélisation par la méthode des éléments finis d’assemblages collés à l’aide d’adhésifs flexibles – Application à la modélisation d’assemblages hybrides (boulonnés/collés) aéronautiques. Technical Presentation, SAMTECH Workshop on Non Linear Simulation, 29 January 2009, Seilh (FR).

Paroissien, E., 2007. Contribution aux assemblages hybrides (boulonnés/collés) – Application aux jonctions aéronautiques. Technical Presentation, Journée « Collage – Caractérisation et Applications », CCT CNES, 8 March 2007, Toulouse (FR).

Chieragatti, R., Paroissien, E., Huet, J., 2004. Faisabilité d’assemblages mixtes boulonnés-collés en aéronautique. CETIM, 21 September 2004, Saint-Étienne (FR).
oatao link

By continuing your browsing on this site, you accept the use of cookies to offer you adapted content and services OK
For full functionality of this site it is necessary to enable JavaScript. Here are the instructions how to enable JavaScript in your web browser.