Publications

Mis à jour le

Number of items: 52.

Article

Malek, Benaïssa and Chaussumier, Michel and Mabru, Catherine. Effect of anodization and loading on fatigue life of 2618- T851 aluminum alloy. (2022) International Journal of Fracture. ISSN 0376-9429

Brasileiro, Lucas and Sun, Zidan and Mabru, Catherine and Chieragatti, Rémy and Proust, Gwenaelle and Retraint, Delphine. Experimental study of a CoCrMo alloy treated by SMAT under rotating bending fatigue. (2022) Procedia Structural Integrity, 38. 283-291. ISSN 2452-3216

Sánchez Camargo, César Moisés and Hor, Anis and Mabru, Catherine. A robust inverse analysis method for elastoplastic behavior identification using the true geometry modeling of Berkovich indenter. (2020) International Journal of Mechanical Sciences, 171. 105370. ISSN 0020-7403

Benaïssa, Malek and Mabru, Catherine and Chaussumier, Michel. Fatigue behavior of 2618-T851 aluminum alloy under uniaxial and multiaxial loadings. (2020) International Journal of Fatigue, 131 (105322). 1-9. ISSN 0142-1123

Souissi, Najib and Mabru, Catherine and Bradai, Chedly. Aging response investigation of 2017 Al alloy processed by gravity and squeeze casting. (2019) International Journal of Materials Research, 110 (9). 859-864. ISSN 1862-5282

Naanani, Soumaya and Monchoux, Jean-Philippe and Mabru, Catherine and Couret, Alain. Pure climb of [001] dislocations in TiAl at 850 °C. (2018) Scripta Materialia, 149. 53-57. ISSN 1359-6462

Vermesse, Eric and Mabru, Catherine and Arurault, Laurent. Surface integrity after pickling and anodization of Ti–6Al–4V titanium alloy. (2013) Applied Surface Science, 285 (Part B). 629-637. ISSN 0169-4332

Ben Slima, Khalil and Penazzi, Luc and Mabru, Catherine and Ronde-Oustau, François. Fatigue analysis-based numerical design of stamping tools made of cast iron. (2013) The International Journal of Advanced Manufacturing Technology, 67 (5-8). 1643-1650. ISSN 0268-3768

Chaussumier, Michel and Mabru, Catherine and Shahzad, Majid and Chieragatti, Rémy and Rezaï-Aria, Farhad. A predictive fatigue life model for anodized 7050 aluminium alloy. (2013) International Journal of Fatigue, 48. 205-213. ISSN 0142-1123

Goueffon, Yann and Aldebert, Grégory and Mabru, Catherine and Arurault, Laurent and Tonon, Claire and Guigue, Pascale. Flaking of black anodic films in space environment: Ageing and numerical simulation. (2012) Mechanics of Materials, 45. 72-82. ISSN 0167-6636

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad. Effect of sealed anodic film on fatigue performance of 2214-T6 aluminium alloy. (2012) Surface and Coatings Technology, 206 (11-12). 2733-2739. ISSN 0257-8972

Limido, Jérôme and Espinosa, Christine and Salaün, Michel and Mabru, Catherine and Chieragatti, Rémy and Lacome, Jean-Luc. Metal cutting modelling SPH approach. (2011) International Journal of Machining and Machinability of Materials, 9 (3-4). 177-196. ISSN 1748-5711

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad. Surface characterization and influence of anodizing process on fatigue life of Al 7050 alloy. (2011) Materials & Design, 32 (6). 3328-3335 . ISSN 0261-3069

Goueffon, Yann and Mabru, Catherine and Labarrère, Michel and Arurault, Laurent and Tonon, Claire and Guigue, Pascale. Investigations into the coefficient of thermal expansion of porous films prepared on AA7175 T7351 by anodizing in sulphuric acid electrolyte. (2010) Surface and Coatings Technology, 205 (7). 2643-2648. ISSN 0257-8972

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad. Influence of surface treatments on fatigue life of Al 7010 alloy. (2010) Journal of Materials Processing Technology, 210 (13). 1821-1826. ISSN 0924-0136

Goueffon, Yann and Arurault, Laurent and Fontorbes, Sandra and Mabru, Catherine and Tonon, Claire and Guigue, Pascale. Chemical characteristics, mechanical and thermo-optical properties of black anodic films prepared on 7175 aluminium alloy for space applications. (2010) Materials Chemistry and Physics, 120 (2-3). 636-642. ISSN 0254-0584

Chaussumier, Michel and Shahzad, Majid and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad. A fatigue multi-site cracks model using coalescence, short and long crack growth laws, for anodized aluminum alloys. (2010) Procedia Engineering, 2 (1). 995-1004. ISSN 1877-7058

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad. Influence of anodizing process on fatigue life of a machined aluminium alloy. (2010) Procedia Engineering, 2 (1). 1015-1024. ISSN 1877-7058

Shah, Masood and Mabru, Catherine and Rezaï-Aria, Farhad. Investigation of crack propagation in X38CrMoV5 (AISI H11) tool steel at elevated temperatures. (2010) Procedia Engineering, 2 (1). 2045-2054. ISSN 1877-7058

Goueffon, Yann and Mabru, Catherine and Labarrère, Michel and Arurault, Laurent and Tonon, Claire and Guigue, Pascale. Mechanical behaviour of black anodic films on 7175 aluminium alloy for space applications. (2010) Metal Finishing, 108 (2). 22-27. ISSN 0026-0576

Goueffon, Yann and Mabru, Catherine and Labarrère, Michel and Arurault, Laurent and Tonon, Claire and Guigue, Pascale. Mechanical behavior of black anodic films on 7175 aluminium alloy for space applications. (2009) Surface and Coatings Technology, 204 (6-7). 1013-1017. ISSN 0257-8972

Goueffon, Yann and Arurault, Laurent and Mabru, Catherine and Tonon, Claire and Guigue, Pascale. Black anodic coatings for space applications: study of the process parameters, characteristics and mechanical properties. (2009) Journal of Materials Processing Technology, 2 (11). 5145-5151. ISSN 0924-0136

Shah, Masood and Mabru, Catherine and Boher, Christine and Le Roux, Sabine and Rezaï-Aria, Farhad. Crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens. (2009) Advanced Engineering Materials, 1 (9). 746-749. ISSN 1438-1656

Shah, Masood and Boher, Christine and Le Roux, Sabine and Rezaï-Aria, Farhad and Mabru, Catherine. An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens. (2009) Revue de Métallurgie - Cahiers d'Informations Techniques (3). 140-145. ISSN 0035-1563

Suraratchai, Monchai and Limido, Jérôme and Mabru, Catherine and Chieragatti, Rémy. Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy. (2008) International Journal of Fatigue, 3 (12). 2119-2126.

Rishmany, Jihad and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad. Simplified modelling of the behaviour of 3D-periodic structures such as aircraft heat exchangers. (2008) International Journal of Mechanical Sciences, 5 (6). 1114-1122. ISSN 0020-7403

Mabru, Catherine and Stephan, Nicolas and Chieragatti, Rémy. Influence of coating on the thermal resistance of a Ni-Based superalloy. (2006) International Journal of Damage Mechanics, 1 (4). 375-391. ISSN 1056-7895

Conference or Workshop Item

Ziri, Sabrine and Mabru, Catherine and Hor, Anis. Effect of powder size and processing parameters on surface, density and mechanical properties of 316L elaborated by Laser Powder Bed Fusion. (2021) In: ESAFORM 2021 24th International Conference on Material Forming, 14 April 2021 - 16 April 2021 (Virtual event, Belgium).

Malek, Benaïssa and Mabru, Catherine and Chaussumier, Michel. Multiaxial fatigue behavior of 2618 aluminum alloy. (2019) In: 12th International Conference on Multiaxial Fatigue and Fracture (ICMFF12), 24 June 2019 - 26 June 2019 (Bordeaux, France).

Benaïssa, Malek and Mabru, Catherine and Chaussumier, Michel. Study and modelling of anodized 2618 aluminum behavior subjected to multiaxial fatigue. (2018) In: 12th International Fatigue Congress (FATIGUE 2018), 27 May 2018 - 1 June 2018 (Poitiers, France).

Naanani, Soumaya and Hantcherli, Muriel and Hor, Anis and Mabru, Catherine and Monchoux, Jean-Philippe and Couret, Alain. Study of the low cyclic behaviour of the IRIS alloy at high temperature. (2018) In: 12th International Fatigue Congress (FATIGUE 2018), 27 May 2018 - 1 June 2018 (Poitiers, France).

Ben Slima, Khalil and Penazzi, Luc and Mabru, Catherine and Ronde-Oustau, François and Rezaï-Aria, Farhad. A new method for advanced virtual design of stamping tools for automotive industry: application to nodular cast iron EN-GJS-600-3. (2011) In: The 14th International Conference on Material Forming - ESAFORM 2011, 27-29 April 2011, Belfast, UK .

Chieragatti, Rémy and Espinosa, Christine and Lacome, Jean-Luc and Limido, Jérôme and Mabru, Catherine and Salaün, Michel. Détermination d’un Kt local associé à la rugosité de surface ; influence sur la tenue en fatigue. (2010) In: 29èmes journées de printemps de la SF2M "Influence des procédés sur la tenue en fatigue, rôle des défauts", 19-20 May 2010, Paris .

Chaussumier, Michel and Shahzad, Majid and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad. Modélisation de la multi-fissuration d’un alliage d’aluminium 7010 traité par oxydation anodique chromique. (2010) In: 29èmes journées de Printemps de la SF2M, "Influence des procédés sur la tenue en fatigue, rôle des défauts", 19 May 2010 - 20 May 2010 (Paris, France).

Shah, Masood and Mabru, Catherine and Boher, Christine and Le Roux, Sabine and Rezaï-Aria, Farhad. An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SE(T) specimens. (2009) In: TOOL 2009 - Tool steels, 2 June 2009 - 4 June 2009 (Aachen, Germany).

Chaussumier, Michel and Shahzad, Majid and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad. Influence du décapage sur la tenue en fatigue de l'alliage Al7010-T7451 traité par oxydation anodique chromique. (2009) In: CFM 2009 19ème Congrès Français de Mécanique, 24 August 2009 - 28 August 2009 (Marseille, France).

Goueffon, Yann and Monjauze, Muguette and Mabru, Catherine and Arurault, Laurent and Tonon, Claire and Guigue, Pascale. Study of degradation mechanisms of black anodic films in simulated space environment. (2009) In: 11th International Symposium on Materials in Space Environment, 15 September 2009 - 18 September 2009 (Aix-en-Provence, France).

Shah, Masood and Mabru, Catherine and Boher, Christine and Le Roux, Sabine and Rezaï-Aria, Farhad. An investigation of the crack propagation in tool steel X38CrMoV5(AISI H11) in SET specimens. (2008) In: JIP 2008 international conference on fatigue and plasticity : from mechanisms to design, 20 May 2008 - 22 May 2008 (Paris, France).

Suraratchai, Monchai and Limido, Jérôme and Mabru, Catherine and Chieragatti, Rémy. Determination of a local stress concentration induced by machining and its effect on fatigue life of an aluminum alloy. (2008) In: JSTMM'08 - Sixth Scientific and Technical Symposium on Manufacturing and Materials, 14-15 Nov 2008, Monastir, Tunisia .

Limido, Jérôme and Espinosa, Christine and Salaün, Michel and Lacome, Jean-Luc and Mabru, Catherine and Chieragatti, Rémy. Metal cutting analysis : SPH approach. (2008) In: JSTMM'08, 14-15 Nov 2008, Monastir, Tunisie .

Espinosa, Christine and Lacome, Jean-Luc and Limido, Jérôme and Salaün, Michel and Mabru, Catherine and Chieragatti, Rémy. Modelling High Speed Machining with the SPH Method. (2008) In: 10th International LS-DYNA Users Conference, 8 June 2008 - 10 June 2008 (Dearborn, United States).

Shah, Masood and Boher, Christine and Rezaï-Aria, Farhad and Mabru, Catherine. Propagation de fissure sur X38CrMoV5 sur éprouvettes à l'échelle réduite. (2008) In: Colloque National MECAMAT Procédés de transformation des matériaux de structure, 28 January 2008 - 30 January 2008 (Aussois, France).

Limido, Jérôme and Espinosa, Christine and Salaün, Michel and Mabru, Catherine and Chieragatti, Rémy. High speed machining modelling : SPH method capabilities. (2007) In: 4th Smoothed Particle Hydrodynamics European Research Interest Community (SPHERIC) workshop, 27 May 2009 - 29 May 2009 (Nantes, France).

Limido, Jérôme and Suraratchai, Monchai and Mabru, Catherine and Espinosa, Christine and Salaün, Michel and Chieragatti, Rémy. Effet des paramètres d'usinage sur la durée de vie en fatigue des pièces aéronautiques en alliages d'aluminium de la série 7000. (2007) In: MECAMAT Aussois 2007 : colloque national sur la fatigue des matériaux et des structures, 22 January 2007 - 26 January 2007 (Aussois, France).

Limido, Jérôme and Suraratchai, Monchai and Mabru, Catherine and Espinosa, Christine and Salaün, Michel and Chieragatti, Rémy. Machining parameters effects on fatigue life of aluminium alloy aeronautical parts. (2007) In: Fatigue Design 2007 : International Conference on the respective input of the numerical simulation and the experimental approach in fatigue design, 21 November 2007 (Senlis, France).

Goueffon, Yann and Mabru, Catherine and Arurault, Laurent and Guigue, Pascale and Tonon, Claire. Problématique d'adhérence des revêtements anodisés inorganiques noirs pour applications spatiales. (2007) In: 14e journées d'étude sur l'adhésion, 24 September 2007 - 28 September 2007 (Biarritz, France).

Rishmany, Jihad and Renault, Lionel and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad. Static and dynamic behaviour of a 3D periodic structure. (2006) In: 16th European Conference of Fracture : ECF 16 Failure Analysis of nano and engineering materials and structures, 3 July 2006 - 7 July 2006 (Alexandroupolis, Greece).

Suraratchai, Monchai and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad. Influence de gammes d'usinage sur la tenue en fatigue d'un alliage léger aéronautique. (2005) In: CFM 2005 : 17ème Congrès Français de Mécanique, 29 Aug - 02 Sep 2005, Troyes, France .

Mabru, Catherine and Espinosa, Christine and Chieragatti, Rémy. Étude thermomécanique d’une nouvelle géométrie d’éprouvette de fatigue en environnement sévère. (2003) In: 16 ème Congrès Français de Mécanique, 01-05 Sept 2003, Nice, France .

HDR

Mabru, Catherine. Etats de surface - Matériaux de surface : Résistance à l'endommagement. (2012) [HDR]

Patent

Airbus Operations SAS, Toulouse (FR) Method for characterizing the endurance limit of a part from its surface profile. (2011) US 8082114 B2.

Airbus Operations SAS, Toulouse (FR) Procédé de caractérisation de la tenue en fatigue d'une pièce à partir de son profil de surface. (2006) FR 2 898 410 A1.

This list was generated on Thu Mar 28 04:11:29 2024 CET.